Home News Forum                            

Play your favorite classic games and more with the GameEx front end. Read more.

ckongpt2: MAME ROM Information.


Crazy Kong - Part II (c) 1981 Falcon.

A "Donkey Kong" clone.


Main CPU : Z80 (@ 3.072 Mhz)

Sound Chips : AY8910 (@ 1.536 Mhz)

Screen orientation : Vertical

Video resolution : 224 x 256 pixels

Screen refresh : 60.00 Hz

Palette colors : 96

Players : 2

Control : 4-way joystick

Buttons : 1 (JUMP)


Released in February 1981.

Crazy Kong - Part II is not a bootleg of "Donkey Kong"!! Falcon DID have a license from Nintendo, but it was NOT for the US. Crazy Kong - Part II was supposed to be for sale outside the US (South America, Europe, etc.), but the lag in production of arcade DK's by Nintendo for a 3 month period during 1981-82 made demand for any DK type game go through the roof. At this time, Nintendo of America was moving from NY-NJ to Redmond WA and there was a 4 month backlog on orders. This opened the door for the illegal Crazy Kongs to fill the demand. Approximately 20,000 Crazy Kong were distributed illegally in the U.S.

The main difference between Crazy Kong and "Donkey Kong" is the sound, and color capabilities. Crazy Kong ran on hardware that had the same processor as "Donkey Kong", but its video capabilities were lacking, and it had a totally different sound chip. Basically what all this means is that Crazy Kong had terrible sound, and some definite strangeness in the color area. The background music is missing entirely, and most of the sound effects have been changed. For example, in Crazy Kong, Mario makes a 'Hiya!' sound when he jumps, instead of the 'Boing!' that he makes in "Donkey Kong". The graphics use slightly different colors, which change from level to level. The Kong animations are also different, and often do not match up with the in game action. There are also mild changes in gameplay. Kong doesn't toss out nearly as many barrels, and there are other mild changes such as gaps in platforms that were not in the original, and the manner in which the elevators work has changed as well.

There were lots of different Crazy Kong cabinets. The most common one was similar in design to the "Donkey Kong" cabinet, but the artwork was more realistic, and the monitor bezel had a circular clear area, as opposed to the rectangle that most games had. Crazy Kong could also be found in cocktail format. These were usually conversions, and were only decorated with an instruction card.

Original products :

Crazy Kong (Kyoei)

Crazy Kong - Part II (Falcon)

Bootlegs/Hacks :

Crazy Kong (Orca)

Crazy Kong (Alca)

Crazy Kong [Galaxian hardware]

Crazy Kong [Scramble hardware]

Crazy Kong [Moon Cresta hardware]

Crazy Kong - Part II (Jeutel)

Monkey Donkey



* Warp To Level 2 (doesn't work on the "Scramble" hardware bootleg version) : Climb up to the second beam (the one with the hammer right by it). Walk to the right so that Mario is still facing away from you (you can see his back) and is suspended off the side of end of the beam, then jump to the right. He'll 'fall thru' the bottom of the screen and clear it, as if he had climbed all the way to the top.

* A Trick : On the conveyor belt level, Grab the bottom hammer (the one on the row with the full length conveyor belt) and go all the way to the right side of the screen. Push the joystick Right and he'll drop the hammer. Sometimes it'll be in the up position and sometimes it'll be sitting toward the left of Mario. If it's in the up position, jump up and grab it and keep repeating until he drops it on the left position. After this, you can walk away and anything that comes into contact with it will be splatted (Good way of getting extra points). After a few seconds, the hammer will disappear, but the stuff will still splat when it hits where the hammer should be. NOTE : This trick only works on the second level or higher!

* Depending on what PCB the game cabinet had, you could run behind Kong on the rivet screen. This made clearing the rivets much easier.

* On the versions that did not allow you to run behind Kong on the rivet screen, you could stand next to Kong and jump backwards being awarded 100 points.


* Consoles :

Commodore C64 (1983)


Game's rom.

Machine's picture.

MAME Info:

0.33b7 [Nicola Salmoria]

0.02 [Nicola Salmoria, Ville Laitinen]


- Sound problem when collecting/jumping. Tafoid (ID 03743)

- [possible] Kong does not delay leaving with girl. Tafoid (ID 03744)


- 0.138u3: cclimber/ckong sprite X was off by 1 (video\cclimber.c) [hap]. Renamed (ckong) to (ckongpt2), (ckonga) to (ckongpt2a), (ckongb) to (ckongpt2b), (ckong2j) to (ckongpt2j) and (ckongjeu) to (ckongpt2jeu).

- 0.138u2: hap fixed missing pixel gap between Kong's feet and platform in Crazy Kong Part II.

- 0.131u1: Team Japump added clone Crazy Kong Part II (Japan).

- 0.122u8: Changed description of clones 'Crazy Kong (set 1)' to 'Crazy Kong Part II (set 1)', 'Crazy Kong (set 2)' to 'Crazy Kong Part II (set 2)', 'Crazy Kong (Jeutel bootleg)' to 'Crazy Kong Part II (Jeutel bootleg)' and 'Crazy Kong (Alternative levels)' to 'Crazy Kong Part II (alternative levels)'.

- 0.127u1: Fabio Priuli fixed wrong coinage dipsettings. Added dipswitches 'Players' and 2x 'Unknown'.

- 0.123u3: Zsolt Vasvari cleaned up the video driver, mainly via tilemap conversion. This fixes the ape sprite positioning in Crazy Kong - no more gap between feet and platform. Swapped gfx1 roms ($1000, 2000).

- 0.122u8: Changed description to 'Crazy Kong Part II'.

- 13th January 2008: Mr. Do - We have Crazy Kong. Aaron bought this one over a year ago. It was just really difficult to do, though, as it was one big plexi piece, with a 45-degree bend where it curves up. Well, Kiltron was up to the challenge, and this one came out REALLY nice in the end.

- 0.114u4: Aaron Giles fixed P2 control type.

- 0.85u2: Inigo Luja fixed backwards controls in Crazy Kong.

- 0.84u1: Lee and Martin White added clone Crazy Kong (Alternative levels).

- 0.34b1: Added color proms ($0, 20, 40).

- 0.33b7: Changed 'Crazy Kong (Crazy Climber hardware)' to clone '(set 2)' and clone '(alternate version)' to 'Crazy Kong (set 1)'. Renamed (ckong) to (ckonga) and (ckonga) to (ckong).

- 0.29: Accurate colors in Crazy Kong [Tim Lindquist, Nicola Salmoria].

- 0.27: Nicola Salmoria added clone Crazy Kong (alternate version). Changed description of clone 'Crazy Kong (Copyright Jeutel)' to 'Crazy Kong (Jeutel bootleg)'.

- 0.25: Added Crazy Kong (Copyright Jeutel).

- 0.18: Nicola Salmoria fixed bug in the 8910 emulation which caused noise to be played in Crazy Kong when you jumped over a barrel.

- 0.13: Nicola Salmoria modified the 8910 emulator to set the clock frequency at run time, so sound in Crazy Climber and Crazy Kong is now back as normal. Added high score saving to Crazy Kong.

- 0.12: Doug Jefferys provided the color PROMs for Crazy Kong, so colors are now 100% accurate (with the possible exception of Kong itself, which uses a separate palette).

- 0.04: Optimizations in drawgfx(), Crazy Kong benefit as well. New experimental AY-3-8910 sound emulation code provided by Andy Milne. This sounds better in some places and worse in others. It is used by Crazy Climber, Crazy Kong and Bagman.

- 0.02: Nicola Salmoria added Crazy Kong (Crazy Climber hardware) (Falcon 1981). Game is playable with wrong colors and sound. Control: Arrows = Move around and CTRL = Jump. Known issues: Some problems with sound. Crazy Kong emulation set up by Ville Laitinen. This Donkey Kong clone runs on the same hardware as Crazy Climber, most notable differencies being a larger character set and the display rotated 90 degrees.


Other Emulators:

* FB Alpha

Recommended Games (Platform):

Space Panic

Steel Worker

Donkey Kong

FamicomBox (Donkey Kong)

Crazy Kong

Crazy Kong Part II

Kong (Brazil)

Donkey Kong Junior

FamicomBox (Donkey Kong Jr.)

Donkey Kong 3


Naughty Mouse

Treasure Island

Treasure Island (DECO Cassette)


Dock Man


Minky Monkey


Pop Flamer


FamicomBox (Popeye)



Boggy '84

Bristles (Max-A-Flex)

Congo Bongo

Dr. Micro

Hopper Robo

Jump Coaster


Namco Classic Collection Vol.1 (Mappy)


Roc'n Rope

Super Glob

Ben Bero Beh

Complex X

Jumping Jack

Lode Runner

Lode Runner II - The Bungeling Strikes Back

Lode Runner III - The Golden Labyrinth

Lode Runner IV - Teikoku Karano Dasshutsu

Lode Runner - The Dig Fight

Pandora's Palace

Peter Pack-Rat

Vs. Ice Climber

Vs. Ice Climber Dual

Vs. Wrecking Crew

Baluba-louk no Densetsu

Pig Out: Dine Like a Swine!

Sea Hunter Pengui

Multi 5 (Tong Boy)

Romset: 53 kb / 17 files / 31.4 zip

MAME XML Output:

       <game name="ckongpt2" sourcefile="cclimber.c">
              <description>Crazy Kong Part II (set 1)</description>
              <rom name="d05-07.bin" size="4096" crc="b27df032" sha1="57f9be139c610405e3c2fddd7093dfb1277e450e" region="maincpu" offset="0"/>
              <rom name="f05-08.bin" size="4096" crc="5dc1aaba" sha1="42b9e5946ffce7c156d114bde68f37c2c34853c4" region="maincpu" offset="1000"/>
              <rom name="h05-09.bin" size="4096" crc="c9054c94" sha1="1aa08d2501ee620759fd5c111e12f6d432c25294" region="maincpu" offset="2000"/>
              <rom name="k05-10.bin" size="4096" crc="069c4797" sha1="03be185e6914ec7f3770ce3da4eb49cdb97adc85" region="maincpu" offset="3000"/>
              <rom name="l05-11.bin" size="4096" crc="ae159192" sha1="d467256a3a366e246243e7828ff4a45d4c146e2c" region="maincpu" offset="4000"/>
              <rom name="n05-12.bin" size="4096" crc="966bc9ab" sha1="4434fc620169ffea1b1f227b61674e1daf79b54b" region="maincpu" offset="5000"/>
              <rom name="n11-06.bin" size="4096" crc="2dcedd12" sha1="dfdcfc21bcba7c8e148ee54daae511ca78c58e70" region="gfx1" offset="0"/>
              <rom name="l11-05.bin" size="4096" crc="fa7cbd91" sha1="0208d2ebc59f3600005476b6987472685bc99d67" region="gfx1" offset="1000"/>
              <rom name="k11-04.bin" size="4096" crc="3375b3bd" sha1="a00b3c31cff123aab6ac0833aabfdd663302971a" region="gfx1" offset="2000"/>
              <rom name="h11-03.bin" size="4096" crc="5655cc11" sha1="5195e9b2a60c54280b48b32ee8248090904dbc51" region="gfx1" offset="3000"/>
              <rom name="c11-02.bin" size="2048" crc="d1352c31" sha1="da726a63a8be830d695afeddc1717749af8c9d47" region="gfx2" offset="0"/>
              <rom name="a11-01.bin" size="2048" crc="a7a2fdbd" sha1="529865f8bbfbdbbf34ac39c70ef17e6d5bd0f845" region="gfx2" offset="800"/>
              <rom name="prom.v6" size="32" crc="b3fc1505" sha1="5b94adde0428a26b815c7eb9b3f3716470d349c7" region="proms" offset="0"/>
              <rom name="prom.u6" size="32" crc="26aada9e" sha1="f59645e606ea4f0dd0fc4ea47dd03f526c534941" region="proms" offset="20"/>
              <rom name="prom.t6" size="32" crc="676b3166" sha1="29b9434cd34d43ea5664e436e2a24b54f8d88aac" region="proms" offset="40"/>
              <rom name="cc13j.bin" size="4096" crc="5f0bcdfb" sha1="7f79bf6de117348f606696ed7ea1937bbf926612" region="samples" offset="0"/>
              <rom name="cc12j.bin" size="4096" crc="9003ffbd" sha1="fd016056aabc23957643f37230f03842294f795e" region="samples" offset="1000"/>
              <chip type="cpu" tag="maincpu" name="Z80" clock="3072000"/>
              <chip type="audio" tag="mono" name="Speaker"/>
              <chip type="audio" tag="aysnd" name="AY-3-8910A" clock="1536000"/>
              <chip type="audio" tag="samples" name="Samples"/>
              <display tag="screen" type="raster" rotate="270" width="256" height="224" refresh="60.000000" />
              <sound channels="1"/>
              <input players="2" buttons="1" coins="2">
                     <control type="joy" ways="4"/>
              <dipswitch name="Lives" tag="DSW" mask="3">
                     <dipvalue name="3" value="0" default="yes"/>
                     <dipvalue name="4" value="1"/>
                     <dipvalue name="5" value="2"/>
                     <dipvalue name="6" value="3"/>
              <dipswitch name="Bonus Life" tag="DSW" mask="12">
                     <dipvalue name="7000" value="0" default="yes"/>
                     <dipvalue name="10000" value="4"/>
                     <dipvalue name="15000" value="8"/>
                     <dipvalue name="20000" value="12"/>
              <dipswitch name="Coinage" tag="DSW" mask="112">
                     <dipvalue name="5 Coins/1 Credit" value="112"/>
                     <dipvalue name="4 Coins/1 Credit" value="80"/>
                     <dipvalue name="3 Coins/1 Credit" value="48"/>
                     <dipvalue name="2 Coins/1 Credit" value="16"/>
                     <dipvalue name="1 Coin/1 Credit" value="0" default="yes"/>
                     <dipvalue name="1 Coin/2 Credits" value="32"/>
                     <dipvalue name="1 Coin/3 Credits" value="64"/>
                     <dipvalue name="1 Coin/4 Credits" value="96"/>
              <dipswitch name="Cabinet" tag="DSW" mask="128">
                     <dipvalue name="Upright" value="128" default="yes"/>
                     <dipvalue name="Cocktail" value="0"/>
              <driver status="good" emulation="good" color="good" sound="good" graphic="good" savestate="unsupported" palettesize="96"/>

emumovies.com      Retro bytes Portal           Bookmark and Share

Developed by: Spesoft  Headsoft     Terms of use     Privacy    Advertise